CISCO FPR2120-NGFW-K9 — Брандмауэр для устройств серии Firepower 2100, всего до 16 портов Ethernet (12x1G RJ-45,

FPR2120-NGFW-K9 Overview The Cisco Firepower 2100 Series is a family of four threat-focused NGFW security platforms that deliver business resiliency through superior threat defense. It offers exceptional sustained performance when advanced threat functions are enabled. These platforms uniquely incorporate an innovative dual multicore CPU architecture that optimizes firewall, cryptographic, and threat inspection functions simultaneously. The series’ firewall throughput range addresses use cases from the Internet edge to the data center. Network Equipment Building Standards (NEBS)- compliance is supported by the Cisco Firepower 2100 Series platform. The FPR2120-NGFW-K9 stands for Cisco Firepower 2120 NGFW Appliance, 1RU. Shows the Appearance Product Number FPR2120-NGFW-K9 Product Description Cisco Firepower 2120 NGFW Appliance, 1RU Dimensions (H x W x D) 1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) Form factor (rack units) 1RU I/O module slots 0 Integrated I/O 12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 1 Gigabit (SFP) Ethernet interfaces Network modules None Maximum number of interfaces Up to 16 total Ethernet ports (12x1G RJ-45, 4x1G SFP) Integrated network management ports 1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) Serial port 1 x RJ-45 console USB 1 x USB 2.0 Type-A (500mA) Storage 1x 100 GB, 1x spare slot (for MSP) Shows the Front Panel ① Power LED ② Locator beacon ③ System LEDs ④ Type A USB 2.0 port ⑤ RJ-45 console port ⑥ Gigabit Ethernet management port: l Firepower Threat Defense—Management 0 (also referred to as Management 1/1 and Diagnostic 1/1) l ASA—Management 1/1 ⑦ 12 RJ-45 1G/100M/10M auto duplex/auto MDI-X Base-T ports Ethernet 1/1 through 1/12 labeled top to bottom, left to right ⑧ Pullout label card with chassis serial number ⑨ 4 fixed SFP (1G) ports Fiber ports 1/13 through 1/16 labeled left to right ⑩ SSD (slot 1) ⑪ SSD (slot 2) Shows the Rear Panel ① Power on/off switch ② Fixed power supply module ③ Fixed fans ④ 2-post grounding lug Specifications Product Number FPR2120-NGFW-K9 Product Description Cisco Firepower 2120 NGFW Appliance, 1RU Hardware Specifications Dimensions (H x W x D) 1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm) Form factor (rack units) 1RU I/O module slots 0 Integrated I/O 12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 1 Gigabit (SFP) Ethernet interfaces Network modules None Maximum number of interfaces Up to 16 total Ethernet ports (12x1G RJ-45, 4x1G SFP) Integrated network management ports 1 x 10M/100M/1GBASE-T Ethernet port (RJ-45) Serial port 1 x RJ-45 console USB 1 x USB 2.0 Type-A (500mA) Storage 1x 100 GB, 1x spare slot (for MSP) Power supplies Configuration Single integrated 250W AC power supply. AC input voltage 100 to 240V AC AC maximum input current < 2.7A at 100V AC maximum output power 250W AC frequency 50 to 60 Hz AC efficiency >88% at 50% load Redundancy None Fans 4 integrated (2 internal, 2 exhaust) fans Noise 56 dBA @ 25C 74 dBA at highest system performance. Rack mountable Yes. Fixed mount brackets included (2-post). Mount rails optional (4-post EIA-310-D rack) Weight 16.1 lb (7.3 kg): with 2x SSDs Temperature: operating 32 to 104°F (0 to 40°C) Temperature: nonoperating -4 to 149°F (-20 to 65°C) Humidity: operating 10 to 85% noncondensing Humidity: nonoperating 5 to 95% noncondensing Altitude: operating 10,000 ft (max) Altitude: nonoperating 40,000 ft (max)