Ubiquiti Pro Max 48 PoE — сенсорный экран 1,3 дюйма, 32 порта GbE RJ45, коммутационная способность 224 Г

Pro Max 48 PoE A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output. Specifications Mechanical Dimensions 442.4 x 400 x 44 mm (17.4 x 15.7 x 1.7″) Weight Without mounting brackets: 6.2 kg (13.7 lb) With mounting brackets: 6.3 kg (13.9 lb) Enclosure Material SGCC steel Hardware Management Interface Ethernet In-Band Networking Interface (32) GbE RJ45 ports (16) 1/2.5 GbE RJ45 ports (4) 10G SFP+ ports PoE Interface (32) PoE/PoE+ (Pins 1, 2+; 3, 6-) (16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 😎 Total Non-Blocking Throughput 112 Gbps Switching Capacity 224 Gbps Power Method (1) Universal input, 100—240V AC, 50/60 Hz (1) USP-RPS DC input Power Supply AC/DC, internal, 820W Supported Voltage Range 100—240V AC Max Power Consumption 100W (Excluding PoE output) Total Available PoE 720W Max PoE Wattage per Port by PSE PoE: 15.4W PoE+: 30W PoE++: 60W Voltage Range PoE Mode PoE: 44—57V PoE+: 50—57V LCM Display (1) 1.3″ touchscreen Button Factory reset Ambient Operating Temperature -5 to 40° C (23 to 104° F) Ambient Operating Humidity 10 to 90% noncondensing Certifications CE, FCC, IC Switching Features Layer 2 Features IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs Layer 3 Features DHCP for locally-managed networks DHCP relay Inter-VLAN routing between networks on same switch Static routing between local networks Network isolation with ACLs LEDs System Status RPS Status Application Requirements UniFi Network Version 8.0.24 and later